Wednesday, December 31, 2014

Comet Lovejoy Shines Green on New Year's Eve

One last post in 2014 ya'll! Here is Comet Lovejoy C/2014 Q2 at 10pm ET tonight, taken with my DSLR on a fixed tripod and stacked in Deep Sky Stacker. In spite of the bright moon, the skies were completely clear and the green color showed up without cheating the saturation up at all!

In Photoshop, I stretched the histogram in levels by sliding the gray slider to the left, then used the eye dropper in Curves to identify the grays and turn them up. Next, I created a Gaussian blur layer and subtracted it to get rid of the slightly red hot zone that I had from not taking flat frames.

comet lovejoy new years eve
Canon T5i on fixed tripod, stack of 46 light, 21 dark, 12 bias, 205mm, f/5, ISO 3200, 1.6 sec
new years eve comet lovejoy
Crop of the above image


Happy New Year everyone! See you in 2015!

Comet Lovejoy C/2014 Q2 in Lepus

Comet Lovejoy C/2014 Q2 is currently in the constellation Lepus, and the celestial rabbit's bunny ears made excellent pointer stars to help locate the comet last night! The comet was visible with binoculars and with my DSLR even through thin clouds. Tonight is supposed to be crystal clear, so I might make another attempt to photograph it since I don't really have any NYE plans.

comet lovejoy c/2014 q2 75mm DSLR
Brightness, contrast, and saturation adjusted in Photoshop

comet lovejoy c/2014 q2 75mm DSLR
Original image, single frame with Canon T5i, ISO 3200, 75mm, f/4, 6 sec

Tuesday, December 30, 2014

Light Painting in the Backyard

Although it's been the third least snowiest December on record in central Indiana, I think I could count the number of clear nights on one hand. When the skies aren't cooperating, I get a little stir crazy - so I had to battle my friend Luke in the backyard using my epic lightning powers!

lightning iphone light painting power
Light painting using SlowShutter Cam app for iPhone, merged and adjusted in Photoshop

FOCUS: To focus the image, have the subject stand in the spot where they will be during the photo and shine the light on themselves - try lighting up the face and clothes, just enough to give the photographer a target. Lock the focus on the subject when they are bright enough to autofocus.

LIGHT THE SUBJECT: Now start the photo with a 3 second delay and run over to the subject. First establish them in the image by shining the light away from the camera toward the subject - simulating a flash essentially. Paint their body with light for a few seconds.

DRAW WITH LIGHT: Now with the flashlight aiming toward the camera, paint the lines you want to show up. We used a simple white LED keychain for these.

I realized when I upgraded my iPhone, I also made my Glif mount for the iPhone 5 less useful - seen here with my new iPhone 6 (in a case) rubber banded to it to hold it in place... Apparently they make a new Glif iPhone tripod adapter mount that is more universal and accommodates the curved edges of the new iPhone 6.


Ok so here is what the photos look like straight out of the iPhone using Slow Shutter Cam app as the camera...

lightning iphone light painting power
Image straight from iPhone with brightness adjustment in Snapseed app

shoot energy from hands light painting
Image straight from iPhone, taken with Slow Shutter Cam app in light trail mode
I also tried light painting with my Canon T5i. I made the image below by stacking several frames in Photoshop and using blend mode Lighten to only incorporate the lightest parts from each image. I painted the birch trees and step stones with a white LED.

I think it looks a little like lightning! I really like the blue glowing energy in this image!

light painting highlight trees and stones
Stack of 5 images, each at f/7.1, 18mm, ISO 400, 16 sec

Examining Cool #14 Welder's Glass Eclipse Shades

My sister got me these cool eclipse viewing shades for Xmas! They look like normal sunglasses, which is a lot cooler than those paper eclipse shades they hand out at viewing parties, and a lot more functional that just getting a sheet of black polymer. They are comfortable and feel very sturdy.

welder glass eclipse shade
Phillips Safety Products No.14 Welder's Glass Eclipse Viewing Shades
They look like bug-eye regular sunglasses, but once I put them on I immediately realized these were no normal sunglasses. I couldn't see a thing! It's clear that these No. 14 Welder's Glass green shades filter much more light than the typical pair of sunglasses.

Check it out, when I hold them up to the light, you can't even see through them!

welder's glass block light

The glasses also come with these protective side shades. The material looks similar to what the frames are made from, but not the same thing as the lenses of the glasses. I wanted to check them out, so I held them up to the bathroom light too and could see through it. These definitely don't filter as much light - so never use the side shade thing to look at the sun!

welder's glasseswelder side shade light through

I think the reason they give you these side extension is to help block light coming in from the sides. When you look at the sun, because the black glass is reflective you can end up being distracted by the reflection of your own eye looking back at you. These side shades help a little bit, but I ended up taking them off and just using my hands to block light on the sides.

I guess the other reason is because these are literally welder's safety glasses, so the side shades probably help protect your eyes from sparks. 

welder safetly glasses solar viewer

This is my first time looking at the sun through welder's glass, which makes the sun appear an eerie green! It's still pretty bright, I'm not sure if you'd be able to see any sun spots with welder's glass - but it sure does give you a nice view of the sun's disk, which is what really matters during an eclipse.

sun is green dot through welder glass
Welder's glass = Green dot

black polymer solar shade
Black polymer = Orange dot

Monday, December 22, 2014

Camera Settings for Christmas Lights

We've had so many gray cloudy days and nights this season so far! It's driven me outside to try to photograph anything resembling stars, in this case Christmas lights! Ok, the first thing I learned right off the bat is that Christmas lights are not stars, and do not use the same settings as stars. But I sort of have a reputation for being able to take photos at night, so it was definitely worth while to play around with some camera settings for Christmas lights to keep up that night-time photographer street cred.

1. Use a high f-stop number (narrow aperture) to get pretty lens flares around the lights. This also works with bright stars and planets! Usually when I shoot stars I shoot with a wide aperture to let in the most light (low f-number), but this is not the ideal setting for Christmas lights.

christmas light camera settings
Very high f-number, very low ISO to reduce noise, and adjust seconds until you have it how you like

2. You don't have to worry about star trails, so you can use a looooong exposure. I tend to use a wide open aperture for stars to maximize the amount of light I let in as quickly as possible before the stars move, but with Xmas lights this isn't an issue. Keep it narrow and long!

different camera settings for christmas lights
Variety of camera settings all using ISO 100

3. Low ISO to reduce background noise. You have all the time in the world, the house isn't moving, so use super low ISO and longer exposures. Let the individual lights show, or you'll end up with a big bright blob in the bushes.

xmas light camera settings
ISO 200, 22mm, f/9, 15 sec
xmas light camera settings
A little over-cooked! ISO 800, 22mm, f/9, 15 sec

4. Turn off indoor/window lights and porch lights, let the ambient light show the house. If you are doing a whole house shot, porch lights might drown out the Christmas lights. I prefer to let the glow from the lights reveal the house.